6 Tile & Grout Cleaning Tips and Tricks

Source: thisoldhouse.com

Tile floors can last a lifetime, but only if you thttps://blog.nationwide.com/how-to-clean-house-fast/ake care of them properly. During repairs, sometimes the problem arises of how to remove the remains of tile material or grout from the tile or other surface. If the tile is just laid, then the easiest way to get rid of the dirt is to rinse with warm water and detergent. But what to do if too much dirt has accumulated over time that you cannot remove with soap and water? There are several techniques.

1. Regularly maintain the hygiene of the tiles

All depending on the level of dirtiness and your current willingness to deal with cleaning the entire bathroom. For example, you may have more time and willpower to clean your floors more often or spend less time on general cleaning. The main advantage of frequent cleaning is that you don’t have to put in a lot of effort. That way, you won’t let dirt linger between your tiles for too long, which means no stains. Even if that happens, there is a solution.

Then there is a general preparation, which implies more aggressive means, as well as a more aggressive approach. You need to get adequate items such as brushes, cloths and others. Do not forget to change the water regularly while mopping the floor so that no traces of dirt remain on the tiles. People generally clean their tiles at least twice a week. This is done to remove debris that can ruin the appearance of the tiles. While the plaster should be cleaned once every two to three months.

2. Take advantage of vinegar and water

Source: everydayhealth.com

You can clean the tiles with almost any means, regardless of their abrasiveness and aggressiveness, because they are durable materials. However, all of these chemicals affect you. Therefore, it would not be a bad idea to consider using milder chemicals to clean the tiles. This will save you money, but you will also reduce the harmful impact on your environment. Before reaching for expensive cleaners, take plain alcohol vinegar and add baking soda. We all have it in our homes, and it is not harmful to you, your skin, or your respiratory system. So, a cheap and practical tool for cleaning all dirt.

Most important of all, it destroys the bacteria that accumulate on the tiles. It is also a healthy alternative to cleaning. Healthy cleaning products should be at the top of the priority list. Mix vinegar with distilled water. Pour the mixture into a pump bottle, as this will make application easier. You will also find it easier to mix the ingredients. Feel free to pour more product, because you can use this mixture for the faucet, bathtub or other surface. The smell of vinegar dissipates quickly, so you shouldn’t worry about that.

3. Clean the surface properly

You can also use a special cleaning agent, such as bleach. After applying it, let the cleanser sit for a while. The more time you give it, the better results you will get. Then, you can start scrubbing away the dirt. In that case, you should use a small, stiffer brush to go over the grout lines. Do not forget that this environment is porous, because moisture passes through all the tiny holes that we cannot see with the naked eye. That’s why it’s important to thoroughly scrub the grout, as it will make it easier to wipe off later. Wipe the surface with a cloth soaked in warm water with a few drops of dish detergent. This will remove any remaining cleaning products and restore the shine of your tiles. You can find more about professional approach to cleaning at renuehawaii.com. That can help you since you will get some tricks only known to seasoned pros.

4. Use steam

Source: which.co.uk

We present you another healthy approach to cleaning. It requires no mixing of ingredients and no purchase of products. All you need is to use the power of hot water or steam. For example, if you want to clean the bathroom tiles, take the opportunity after showering when there is a lot of steam in the room. You can also simply run a stream of hot water. When you generate steam, leave it on for less than half an hour and only then proceed to cleaning. All the heat will soften stubborn dirt, as well as numerous bacteria. This means that it will be much easier for you to clean the tiles.

5. Try hydrogen peroxide

Another popular cleaning agent that we all have in our homes is hydrogen peroxide. This tool has long been known as an excellent option in the fight against spots and blemishes. That’s why you should try it instead of the commonly used tile bleach. Mix hydrogen peroxide with water in a ratio of 1:1 and shake this mixture. Then, apply it on the tiles and let it stand for up to 15 minutes. After that, rub with a cloth or other fabric. You can also use an old brush if the stains are stubborn.

6. Hire professionals

Source: homeadvisor.com

Most dirt and mold is caught between the tiles, and there is also soap scum, scale and others. Unfortunately, we always notice these spots too late, and that’s when the situation got out of control. If our previous tips did not help you or you simply do not have time to experiment with different methods, it is best to hire an expert.¬†One reliable option you can consider is CleaningRank, which is known for providing high-quality cleaning services. They will surely do it better than you, because they have adequate equipment, knowledge and enough experience. Read reviews online to find a reliable company, as there are a wide variety of experts in this field today. They will also give you advice on how to care for your floors.


You understand that maintaining tiles is not an easy task if you have noticed stains on your floors that refuse to disappear. Compared to all other surfaces, they probably require the most attention if you want them to always look perfect. Fortunately, it is not difficult to achieve this result if you work with the right people.