8 Common Mistakes People Make When Using LED Growing Lights

Due to different technologies and techniques, modern farming has been becoming much more sustainable than ever before. One such technology used to maximize the yield without having any negative impact on the environment is the LED grow lights. If you are looking for some innovative way to grow your indoor plants, you should consider trying these LED growing lights.

There is no doubt that LED grow lights are beneficial in providing the desired growth to your plants but only when used efficiently. If they are not used correctly, then they can even harm your plants. Therefore, you have to be attentive while using this technology. In this article, we will share some of the common mistakes you should avoid using LED grow lights. Visit this website to find different lamp models.

Source: horticulture.co.uk

Common Mistakes People Should Avoid While Using Led Grow Lights

People who love having indoor plants know that it is not easy to grow and maintain them. But by using the LED grow lights in the right way, you can achieve this objective with not much difficulty.

Let us check some of the common mistakes you need to make while using this technique for plant growth. In the meantime, if you are looking for some other innovative ways that can help you achieve similar goals, then consider checking out cocafish.com

1. Do not overheat the plants:

Temperature is a significant factor in a plant’s sound development and ought not to be disregarded. Therefore, overheating is a warning we need to consider and attempt to stay away from. When plants experience too much heat, then the chances to get damaged increase. You will realize the plant is taking an excessive amount of warmth if the leaves nearest to the light begin becoming brown.

If a portion of the leaves starts making curls, it may indicate that the plant is excessively near the light. To solve this issue, you need to provide good ventilation to cool them down. 

Source: hortipower.com

2. Not providing sufficient lighting: 

To make sure that your plants remain healthy, it is essential to provide them with proper illumination. For this purpose only, cultivators need to think about the size of the plant project and ascertain the amount of LED light that would be adequate for every one of the plants they are developing.

Let us take an example, for the yield of 100 g; a 200W LED is the best option to supply enough illumination to them. Growers have to be very careful about it and keep checking that all the plants are receiving good lighting. 

3. Not installing the LED at a proper distance: 

It becomes challenging for beginners to figure out the correct distance between the LED and the plants. Generally, most people make this mistake by placing it either too far or too close to the yields. If you place it too near the greens, then it can damage it by overheating. And on the contrary, if you set it too far, the plants will not receive enough illumination.

No rule can guarantee the exact distance, but many experts recommend that these grow lights to be placed at a distance of 12-18 inches from the yield.

Source: gardenfundamentals.com

4. Not using superior quality products:  

Light is among the most crucial components to consider when developing plants since it triggers the photosynthesis cycle. If you’re utilizing the regular and inferior quality lights, you’re not prone to develop further and sound plants. Thus, for best outcomes, it is suggested that you utilize full range LED grow lights. These lightings are specially designed for this purpose only. LED lights come in a variety of shapes and sizes, so be sure to choose the right one for your needs. If you’re only growing vegetables, for example, you don’t need a powerful light like a T5 or HPS bulb. A lower-powered LED light like a PAR38 will work just fine.

5. Picking up the wrong light spectrum:

To make sure that your plants develop efficiently, remember that they need different lights for each development phase. When you pick full range lights, this guarantees you accomplish this objective without any problem. Notwithstanding, if you wind up choosing some unacceptable setting, your greens can not grow as expected.

At such critical times, think about the conditions that help in providing an appropriate environment for the yields. Realize that the blue range of light aids plants in their vegetative development stage. This likewise implies that if you set the light emanating to red range, you will obstruct its growth. 

Source: gardenerspath.com

6. Not picking up the proper schedule:

Scheduling is another important factor that the growers must not miss to consider while managing the growth of their plants. The individual who is liable for making the schedule ought to consistently know what’s going on in the room where the greens are kept. It is significant to note down the timings to turn off and on these grow lights. An extreme change in such a routine might contrarily affect the plant’s creation.

7. Poor maintenance of LED grow lights:

Whenever you invest in some useful technology, it becomes your responsibility to maintain it to make sure that it works properly. They carry various advantages to the developing system, and a little upkeep and readiness can save you a great difficult situation. It is suggested that you arrange a stabilizer and associate it to the lights to balance the approaching voltage, safeguarding the chip present inside the LEDs. 

Soucer: guolvmetalware.com

8. Neglecting the other essential factors of growth:

No doubt that photosynthesis in plants requires light for its processing, but this does not mean that you can neglect the other essential factors needed for their growth. Be that as it may, even to some extent, disregarding elements like watering, temperature, nutrients, ventilation, and its hereditary qualities could be unfavourable. Such indiscretion might hurt the greens and adversely influence their general wellbeing.

Over-watering plants

One of the most common mistakes people make when using LED grow lights is over-watering plants. Watering your plants with too much water can cause the roots to rot, which will then kill the plant. It is important to water your plants only enough to keep them moist but not so much that the soil becomes soggy.

On the other hand, when a plant’s roots are submerged in water, they can uptake more water and nutrients than if they were exposed to air. Over-watered plants are just as susceptible to root rot as under-watered plants. To prevent this, gently mist your plants every morning and evening with a spray bottle filled with room-temperature water. If you notice your plants looking droopy or wilted, add an extra watering until the leaves start to look perkier.

Source: squarespace-cdn.com

How to pick the right LED light for your grow room

LED growing lights are a great option for gardeners who want to increase their yields. There are many different types of LED lights available, and it can be difficult to decide which one is the best for your grow room.

First, you should consider the size of your grow room. Some LED lights are designed for small spaces, while others are suitable for larger rooms.

Next, you need to consider the type of light your plants will receive. There are three main types of LED light: warm white, cool white, and blue light. Warm white and cool white LEDs produce similar results, while blue light is more beneficial for plants.

Finally, you need to decide on the wattage of your LED light. Higher wattages provide brighter light than lower wattages, but they also require more electricity to operate. Make sure you choose a light that is compatible with your home’s power supply.

To Sum Up

LED grow light is a great tool to boost the growth of your green, especially the indoor ones. However, growers need to be attentive while using this technology; otherwise, it can harm the plants instead of benefitting it.